 |
||
| > Reader's Photo OX5 by Lockheed Martin |
||
 |
||
 |
||
| • ADVERTISE WITH US | ||
| • WHO IS MOAB JEEPER? | ||
|
Home > Jeep Articles > General - Product Reviews > LiteGrip Standard Battery Mount |
||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||
|
LiteGrip Standard Battery MountArticle written by Moab ManDate Added: 10/07/2007 Maybe it?s the looks, or maybe you?re tired of the rather weak OEM battery mount; either way LiteGrip has your battery covered. |
 Under the hood of your vehicle, you have this factory battery mount. The bracket is flimsy and tends to flex as you tighten it down. Too often the battery is not properly held in place. From experience, and first hand knowledge, we have borne witness to spilled battery acid, shorted electrical systems, melted paint from a tipped battery (potential for fire), and a battery that got loose and tried to escape out the bottom of a Jeep.
|
|
||||||||||||
|
LiteGrips solution is this safe, and good looking, aftermarket anodized aluminum battery mount. The thumb screws utilize your existing 5/16" hardware, and the flat mounting surface applies even pressure across the top of the battery to properly secure it even in the worst of rolls. |
|
||||||||||||
|
Of course many of us have dumped our traditional batteries and upgraded to Optima batteries. The LiteGrip Battery Mount can be ordered to accommodate. |
|
||||||||||||
 Final ThoughtsWe like it! The anodized finish looks sharp, and we?re not concerned about the OEM mount crushing the battery corners. | |||||||||||||
Purchase / Vendor Info
|
| Vendor Name: | LiteGrip |
| Address: | 1340 East Carrie Dr. Fruit Heights, UT 84037 |
| Phone: | 801.546.1375 |
| Contact Person: | John Murdock |
| E-Mail Address: | |
| Website: | www.litegrip.com |
Our
Thank You's!
Thank you LiteGrip for another fine product that delivers both performance and good looks.
